Research Phase and Master’s Thesis in the M.Sc. Quantum Science & Technology

During the last year of the Master's program Quantum Science & Technology, you will have the opportunity to work on exciting research topics in the unique research of the Munich Center for Quantum Science and Technology. During this so-called research phase, you can choose from an extensive number of research groups and current projects.

Young researchers at Max-Planck-Institute for Quantum Optics (MPQ). Photo: MCQST.

Research Phase

Current Info Events

2024-04-26 | 15:00: Information on Research Phase, Master's Thesis, and End of Studies in the Master’s Program Quantum Science & Technology Speaker: Prof. Dr. Alexander Holleitner Prof. Dr. Martin Brandt , Place: James-Franck-Str. 1

The structure of the research phase

The one-year research phase (60 ECTS) involves three modules. The first module, called Master’s seminar, is devoted to gathering the specialized knowledge needed for a cutting-edge line of research through a detailed study of the relevant research literature. The second module, called Master’s work experience, focuses on acquiring the technical skills, experimental and/or theoretical, needed for conducting the research project of the Master’s thesis. The first two modules form an intrinsic unit and together account for 30 ECTS. The Master’s thesis forms the third module and accounts for 30 ECTS. It involves completing an independent research project, submitting a written Master’s thesis, and orally defending it in a Master’s colloquium.

During the research phase, the completion of an independent scientific project also involves the acquisition of additional skills such as project management, team-work, and the presentation of scientific results.

Module	Description	Credits (CP)	PL/SL*
Master’s seminar	Literature research and specialization	15	S
Master’s work experience	Methodology and project planning	15	S
Master’s thesis		30	P
Sum		60

*: P="Prüfungsleistung", graded exam,
S="Studienleistung", non-graded exam (pass/fail)

Finding a topic

For this program, the Examination Board has created a list of possible thesis supervisors; they are listed below. To find a topic, please contact the possible thesis supervisors yourself.

The thesis supervisors have the possibility to advertise topics (supervisors see "Access for supervisors" on the right). However, not all possible topics are advertised here, so it is advisable to ask the thesis supervisors directly

Furthermore, it is advisable to start searching for a suitable topic early, about one semester in advance. In a personal interview, you can quickly see whether a topic appeals to you and whether you feel comfortable in the group. We discourage you from simple e-mail exchange, as it is usually not successful.

Who can be my supervisor?

Filtering in the offers for possible theses

You can search through the offers of Master’s thesis topics in our database.

Search for:

Offers of Master’s thesis topics

	Topic	Supervisor
	A finite temperature quantum algorithm for the Hubbard model	Knap
	Research group Collective Quantum Dynamics Description The goal of the thesis is to develop an analyze finite temperature algorithms for quantum computers. The field is quickly evolving. Please contact me to discuss a concrete project.
	Emergent (non-linear) hydrodynamics in ultracold quantum gases	Knap
	Research group Collective Quantum Dynamics Description Isolated quantum matter can thermalize locally because the surrounding system can act as a path. We will study how hydrodynamics can emerge at late times in such systems. The field of quantum dynamics is quickly evolving. Please contact me directly to discuss a concrete project.
	Fractonic quantum matter at low temperatures	Knap
	Research group Collective Quantum Dynamics Description Fractonic quantum matter possesses excitations with constrained mobility. In two dimensions, excitations can for example only move on one dimensional lines. The goal of this thesis is to study either with numerical or field theoretical techniques their ground state and dynamical properties. The field of fractions is quickly evolving. Please contact me directly to discuss a concrete project.
	Optomechanics with Single Photons	Poot
	Research group Quantum Technologies Description In optomechanics, light is used to measure and alter the dynamics of mechanical resonators. It is by far the most sensitive method to observe the tiny vibrations that nanomechanical devices perform: in one second one can determine their position with femtometer precision! Using light to measure the mechanics is not the only aspect of optomechanics. The same light can also be used to change the dynamics of the mechanical device through a process called cavity backaction. The photons exert a force on the resonator, the so-called radiation pressure. In this project we want to explore the ultimate limits to this force. The goal is to measure the force originating from a single photon! For this it is required that the photon interacts with the mechanical resonator as strongly as possible. For this we need to the design and make very low loss optical cavities, such as microring resonators. Also, the mechanical device should have a quality factor as high as possible. You will make both the optical and mechanical components from chips with highly-stressed silicon nitride using state-of-the-art nanofabrication in the cleanroom. Then the devices are placed in a vacuum chamber for their measurement. In our highly-automated setup you can very quickly characterize many of the devices on your chip. Then, with the perfect device parameters you can start to explore the more advanced measurements. Initially we can measure the devices in with pulsed light, but by using single photons we want to explore the ultimate limits to optomechanical forces. See http://www.groups.ph.tum.de/en/qtech/openings/ for a detailed description of this project.
	Quantum Optics on a Chip	Poot
	Research group Quantum Technologies Description Quantum optics is an extremely powerful approach towards quantum communication, quantum sensing, and quantum computing. In particular, quantum information stored in photons has very low decoherence and can be transmitted over large distances through optical fibers. To date, most experiments in quantum optics use optical tables full with mirrors and beam splitters that all have to be carefully aligned and stabilized. This may be good enough for initial demonstrations, but in order to bring quantum science into the realm of quantum technology, a more scalable approach is required. With our expertise in making photonic chips using advanced nanofabrication, we are making putting these exciting quantum optics experiments on chips. Here, light is routed via optical waveguides. Furthermore, by bending a waveguide, one gets the equivalent of a free-space mirror; a beam splitter cube becomes a directional coupler and so on. By combining these elements, we can make the building block for e.g. an optical quantum computer. With that, the possibilities are almost unlimited. For such large-scale optical quantum circuits we also want to incorporate single-photon sources, superconducting single-photon detectors, and optomechanical phase shifters. This all happens on a single chip. Making and characterizing the components is the first step and from there on, you are making more and more complex quantum chips. You will be doing the nanofabrication in the cleanroom, and then use our optical measurement setups to see how each device is performing. Depending on your preference, it may also be possible to add a modelling component to the project. See http://www.groups.ph.tum.de/en/qtech/openings/ for a detailed description of this project.
	Strong electrostatic effects in optomechanical devices	Poot
	Research group Quantum Technologies Description Optomechanics provides extremely sensitive methods to measure the displacement of mechanical resonators. However, the forces are much smaller in optomechanics compared to those in nanoelectromechanical systems (NEMS). The goal of the project is to make, and measure opto-electromechanical devices which have strong electrostatic interactions. This includes the electrostatic spring effect where the resonance frequency depends strongly on the applied voltage. The next step is trying to measure the potential by measuring the ringdown of different mechanical modes. The devices will be made using advanced nanofabrication techniques such as electron beam lithography and reactive ion etching. See http://www.groups.ph.tum.de/en/qtech/openings/ for a detailed description of this project.

Registration for the research phase

Registration for all three modules of the research phase is done simultaneously in the Dean's Office (Dekanat) of TUM Physics, usually at the beginning of the third Master’s semester. Registration requires a signed certificate of mentor counseling. After agreeing on a topic with the future supervisor, students can print out the registration form from the student access website.

After six months the Master’s thesis should begin. Passing the Master's seminar and the Master's training will be recorded in TUMonline and you are officially alowed to start the thesis.

Submitting the thesis, obtaining a grade

Before handing in the Master's thesis, you need to update the final titel of the thesis in the database (student access) and upload an electronic copy (PDF-file). Afterwards, you have to hand in two printed versions in the Dean's Office (Dekanat) at TUM Physics Department. Alternatively you may hand in the rpinted copies via postal mail – use the submission letter you may generate on the status page after uploading the thesis PDF for this. The submission letter (as well as the submission form at the Dean’s Office) especially contains the required statement according to §18 paragraph 9 APSO.

You have to hand in the thesis at the latest on the deadline, please keep this on mind. The thesis is not handed in until the two paper copies and the signed submission form (or the signed submission letter for postal submission) physically arrived at the Dean’s Office! If the two copies and the submission letter are given into the mail without any delay we can interpret the date of uploading the PDF file as submission date retroactively.

Extension of the deadline is only possible for good reasons. See FAQ on Thesis extension.

The Master's thesis will be evaluated by the supervisor and a second examiner. The second examiner is appointed by the examination board on suggestion of the supervisor (after the official registration of the Master’s thesis).

The supervisor and the second examiner will also attend and assign a grade for the Master’s colloquium, which completes the research phase.

Re-enrollment during the research phase

To participate in any examination, you have to be enrolled as a student of TUM. Therefore, if you submit your Master’s thesis or give your Master’s colloquium after the end of the fourth semester, you have to re-enroll for one more semester.

For example, if the due date for your thesis or the scheduled date for your colloquium is in October, you should not forget to re-enroll for the winter semester. The regular deadline for re-enrollment in WS is August 15.

The Master’s colloquium

The advisor for the research project organizes the Master’s colloquium and grades it together with the second examiner. The Master’s colloquium takes approximately 60 minutes, consisting of an oral presentation and an examination of 30 minutes each. Naturally, the Master’s colloquium may be conducted in the context of a group seminar.

Completing your Master’s studies

At the end of the semester in which you reached the required 120 ECTS in your QST Master’s program and passed all required exams, you will be exmatriculated (according to §13(1) enrolment rules of TUM). In most cases, the Master’s colloquium will be the last exam to be completed to reach this point.

Taking further exams and final documents

In principle, you may take further exams after reaching the 120 ECTS, i. e., to improve your grades with different elective courses. For this reason, the final documents can generally not be generated before the date of your exmatriculation. In case you do need the final documents (or even preliminary documents) earlier, you have to request them explicitly. See the Remarks on end of studies and final documents for further information.

Computation of the final grade

The final grade is the ECTS-weighted average of all graded exams.

Module	CP	~%
PH1009 QST Theory	10	12,5
PH1010 QST Experiment	10	12,5
Fokus area	30	37,5
Master’s Thesis	30	37,5
Summe	80	100