Physics for Life Sciences
Module PH9034
Basic Information
PH9034 is a semester module in German language at Bachelor’s level which is offered in winter semester.
This Module is included in the following catalogues within the study programs in physics.
 Service Modules for Students of other Disciplines
If not stated otherwise for export to a nonphysics program the student workload is given in the following table.
Total workload  Contact hours  Credits (ECTS) 

210 h  120 h  7 CP 
Responsible coordinator of the module PH9034 is Julia Herzen.
Content, Learning Outcome and Preconditions
Content
The module Physics for Life Sciences introduces students of life sciences to basic experimental physics.
The lecture Physics for Life Sciences covers the following topics:
1. Introduction, units and dimensions, experimental accuracy and errors
2. Mechanical motions, coordinate systems and ballistics, Newton’s laws, frictional and inertial forces
3. Mechanical work, energy and power, kinetic and potential energy, energy conversion and energy conservation
4. Elastic and plastic collisions
5. Rotational motions, torque and moment of inertia, angular momentum, rotational kinetic energy, gyroscopic precessions
6. Harmonic oscillations, overlap of harmonic oscillations, damped and driven harmonic oscillators
7. Mechanical waves, wave equation, standing waves, interference and diffraction, acoustics, Doppler effect
8. Electrostatics, Coulomb low, electric fields, GaussLow, electric induction
9. Capacitors, current and resistance, electrical work and power, electrical circuits
10. Magnetism, magnetic force between conducting wires, magnetic fields in coils, Lorentz force
11. Magnetization, magnetic induction, electric motors, generators and transformers
12. Ray optics and optical imaging, detectors, refraction and reflection
13. Lenses and mirrors, aberrations, magnifiers, microscope and telescope
14. Wave optics, interference and diffraction of light, polarization and scattering
Content of the laboratory classes:
Measurements, data statistics and experimental accuracy
Mechanics (balance, oscillator and resonance)
Thermodynamics (van der Waals equation of state, heat conduction, fuel cell)
Optics (spectrophotometry, microscope)
Electrostatics (basic electrical circuits, alternating current, electrolysis)
Learning Outcome
After successful completion of the module the students are able to:
(1) understand the basic physical processes and to use basic mathematical and statistical methods
(2) outline and calculate the evolution of mechanical motions, to use and apply the Newton’s laws, to understand causes and effects of the varying physical and inertial forces
(3) apply the principles for energy and momentum conservation
(4) describe elastic and inelastic collisions
(5) describe rotational motions, to calculate and apply the moment of force and inertia, angular momentum and rotational kinetic energy
(6) describe and calculate various mechanical oscillations, including damped and driven oscillators
(7) describe mechanical waves, including their interference and diffraction. To have knowledge on acoustics and Doppler effect
(8) apply the main principles of electrostatics and to use the Coulomb and Gauss low for calculate the electric fields and charge distributions
(9) describe, calculate and use various capacitors, electrical current and resistance, electrical work and power, electrical circuits
(10)understand the basic principles of magnetism, to calculate magnetic forces between conducting wires, magnetic fields in coils, and the Lorentz force
(11) have basic knowledge on magnetization, magnetic induction, electric motors, generators and transformers
(12) describe and use ray optics and optical imaging, detectors, refraction and reflection
(13) describe and calculate optical systems containing lenses and mirrors, magnifiers, as well as microscopes and telescopes
(14) understand the principles of wave optics, to describe and calculate interference and diffraction of light, polarization and scattering
Preconditions
mathematical skills as required to pass the Abitur:
· geometry
· vector analysis
· differential calculus
· integral calculus
Courses, Learning and Teaching Methods and Literature
Courses and Schedule
Type  SWS  Title  Lecturer(s)  Dates  Links 

Learning and Teaching Methods
The module consists of a lecture, a tutorial and a lab course.
Lecture: excathedra teaching with demonstration experiments
Exercise to Physics for Life Sciences: students get problem sheets and try to solve these problems by themselves or in small groups in the first part of each tutorial session. After this phase sample solutions are presented by students or the lecturer and also possible alternative ways to solve to the problems are discussed. Students who present at least two solutions per term during the tutorial can get a bonus of 0.3 on the grade of the module. Following these tutorials will help the students to be prepared to solve the problems during the written exam.
The lecture and the tutorial are closely intertwined and the lecturers are in constant exchange.
The lab class consists of a training phase and a practical exam. During the training phase in the lab students perform and describe seven different experiments, one of them is repeated in a slightly modified way on the day of the practical exam. The students work in small groups of two to three persons when carrying out the experiments and writing the lab report together. The students need to have performed all seven experiments and have successfully written all lab reports, which have to be positively rated by the tutor.
Media
During the lecture a powerpoint presentation is used and some contents are explained using the blackboard. Additionally some example videos and experiments are shown during the lecture. For the exercises problem sheets are prepared. An elearning course in Moodle exists. Presentation slides and problem sheets as well as sample solutions to problems which have already been discussed in the tutorials are available on this platform.
Literature

Olaf Fritsche „Physik für Biologen und Mediziner“ Springer Verlag
 Paul A. Tipler: Physik. Spektrum Lehrbuch, 3. korr. Nachdruck 2000
 D. Giancoli: Physik, Pearson Verlag, 1. Auflage 2011
Module Exam
Description of exams and course work
The module exam consists of two parts. There will be a written exam of 90 minutes duration on the learning outcome from lecture and exercise. The skills and knowledge obtained in the lab course are tested in a lab exam with a written and graded lab report. The lab exam has a total duration of 240 minutes and contains the execution, documentation, analysis, and discussion of an experiment as well as the written answer to questions on the physical foundations, implementation, and setup of the experiment. The grade of the module exam is calculated from the partial grades with 4/7 of the written exam and 3/7 of the lab exam.
For example an assignment in the written exam might be (the exam is in German language): Ein Hochstrahlbrunnen spritzt das Wasser bis in eine Höhe von 140 Metern über der Düse. a) Berechnen Sie die Geschwindigkeit v0 (in km/h), mit der das Wasser aus der Düse strömen würde, wenn keine mechanische Energie verloren ginge. b) Berechnen Sie die Geschwindigkeit v1 (ebenfalls in km/h) des Wassers in halber Höhe. c) Erläutern Sie, warum der tatsächliche Wert der Geschwindigkeit des aufsteigenden Wassers mit ca. 200km/h für v0 über dem berechneten Wert liegt. d) Berechnen Sie welche Höhe die Fontäne erreichen würde, wenn v0 nur halb so groß wie der in Aufgabenteil a) berechnete Wert wäre. e) Pro Sekunde durchlaufen die 500 l Wasser die Düse. Untersuchen Sie, wie lange die Fontäne mit einer Energie von 10.000 Kalorien betrieben werden kann.
In the written exam the following learning aids are permitted: pocket calculator, hand written formulary (i.e. hand written notes on a sheet of the size A4. No copies.).
Participation in the exercise classes is strongly recommended since the exercises prepare for the problems of the exam and rehearse the specific competencies.
There will be a bonus (one intermediate stepping of "0,3" to the better grade) on passed written exams (4,3 is not upgraded to 4,0). The bonus is applicable to the exam period directly following the lecture period (not to the exam repetition) and subject to the condition that the student passes the midterm of presenting at least two sample solutions to the problems to the group.
Exam Repetition
There is a possibility to take the exam in the following semester.
Current exam dates
Currently TUMonline lists the following exam dates. In addition to the general information above please refer to the current information given during the course.
Title  

Time  Location  Info  Registration 
Written Exam to Physics for Life Sciences  
Thu, 20201001, 12:30 till 14:00  0.002 0.003 
Melden Sie sich bitte nur an, wenn Sie die Prüfung verbindlich auch nach Lektüre der Informationen unter https://www.tum.de/dietum/aktuelles/coronavirus/pruefungen ablegen werden. Die Teilnahme an der Prüfung ist ausgeschlossen, wenn Sie nach der geltenden EinreiseQuarantäneverordnung unter Quarantäne stehen, Sie Kontakt zu einem COVID19Erkrankten hatten oder am Prüfungstag Symptome haben. Personen, die einer Gruppe mit erhöhtem Risiko für einen schweren Verlauf angehören und an der Prüfung teilnehmen möchten, sind gehalten, die notwendigen Maßnahmen zum Eigenschutz zu treffen bzw. von einer Teilnahme abzusehen. Hier kann der Krisenstab (krisenstabcoronavirus@tum.de) oder der behandelnde Arzt beraten  till 20200928 