Fundamentals of Surface and Nanoscale Science
Module version of WS 2018/9
There are historic module descriptions of this module. A module description is valid until replaced by a newer one.
Whether the module’s courses are offered during a specific semester is listed in the section Courses, Learning and Teaching Methods and Literature below.
|available module versions|
|WS 2019/20||WS 2018/9||WS 2017/8||WS 2010/1|
PH2071 is a semester module in English or German language at Master’s level which is offered in winter semester.
This Module is included in the following catalogues within the study programs in physics.
- Specific catalogue of special courses for condensed matter physics
- Specific catalogue of special courses for Applied and Engineering Physics
- Complementary catalogue of special courses for nuclear, particle, and astrophysics
- Complementary catalogue of special courses for Biophysics
If not stated otherwise for export to a non-physics program the student workload is given in the following table.
|Total workload||Contact hours||Credits (ECTS)|
|150 h||60 h||5 CP|
Responsible coordinator of the module PH2071 in the version of WS 2018/9 was Johannes Barth.
Content, Learning Outcome and Preconditions
- Surface structure analysis
- 2D crystallography
- Reciprocal & real space imaging
- Electron spectroscopy
- For surface chemical analysis
- For electronic structure
- Elementary processes at surfaces
- Vibrational properties & excitations
- Surface diffusion
- Surface chemical reactions
- Magnetism at interfaces
- Interaction with light
- Self-assembly at surfaces
- Thin film epitaxy
- Atomic/molecular manipulation and quantum confinement
- Electron transport in nanosized objects
- Molecular electronics and spintronics
After successful completion of the module the students are able to:
- understand and describe several surface science concepts and techniques, including 2D-crystallography, elemental and chemical analysis at surfaces, electronic, vibrational and magnetic properties of surfaces, adsorbate bond formation, surface dynamical processes like diffusion, adsorption and desorption, and surface chemical reactions in heterogenous catalysis
- identify the different kinds of nanoscale objects and nanostructured surfaces and discuss:
- their properties,
- their underlying fabrication schemes (including top-down and bottom-up approaches with emphasis on self-assembly & self-organized growth processes) and
- examples of their application in chemistry (catalysis) and electronics/spintronics.
While there are no strict requirements, previous exposure to quantum mechanics and thermal physics and the basic notions of atomic, molecular & condensed matter physics will be helpful.
Courses, Learning and Teaching Methods and Literature
Courses and Schedule
|VO||2||Fundamentals of Surface and Nanoscale Science||Allegretti, F.||
Tue, 14:00–16:00, PH II 227
and singular or moved dates
|UE||1||Exercise to Fundamentals of Surface and Nanoscale Science||Allegretti, F.||dates in groups||
Learning and Teaching Methods
This module consists of a lecture and exercise classes. The lectures are thematically structured and a detailed script is given at the beginning of each lecture. Each lecture commences with a clear outline of the learning objectives. Concepts are linked to prior knowledge acquired both in the general course of study and within the topics covered in this module. The beamer is used for the lecture presentation, while important concepts are illustrated and highlighted on the blackboard.
The exercise classes provide a deeper understanding through examples and case studies from the scientific literature. They are further a setting for stimulating scientific discussions and where the students are encouraged to present and put into context their learning outcome. Laboratory visits guided by experts enhance the insight in the current applications of surface and nanoscale science.
Question sheets provide the means of self-evaluation. Handouts and course announcements are also communicated via the Moodle platform.
Class room beamer presentation, blackboard work, lecture notes, question sheets, lab visits, supplementary literature.
- K. Oura, V.G. Lifshits, A.A. Saranin, A.V. Zotov, M. Katayama "Surface Science", Springer, Berlin 2003; ISBN 3-540-00545-5; department library. (Comprehensive introduction to surface science; very good overview. Provides the base for the 'surface' part of the course.)
- A. Zangwill "Physics at surfaces", Cambridge University Press 1988; Library of E20 and: B.18.K 117. (Very good introductory textbook.)
- H. Ibach "Physics of Surfaces and Interfaces", Springer, Berlin 2006. (Surface and interface phenomenal including electrochemistry; particularly recommendable chapters on surface vibrations, transport and growth processes, magnetism; experimental and theoretical aspects well balanced.)
- H. Lüth "Surfaces and Interfaces of Solid Materials", Springer, Berlin 2001, Library of E20 and: B.18.K 151 (Introductory book on surface science with emphasis on semiconductors; very useful panels on experimental techniques.)
- A. Groß "Theoretical Surface Science: A Microscopic Perspective", Springer, Berlin 2003 ISBN: 3-540-43903-X; library of E20 and department library. (Excellent overview on elementary surface processes and on theoretical concepts to deal with them; very recommendable also for experimentalists.)
- F. Bechstedt "Principles of Surface Physics", Springer 2003, ISBN: 3-540-00635-4, B.18.K.80.2004 A 1 (Excellent overview on elementary surface processes and on theoretical concepts to deal with them; very recommendable also for experimentalists.)
Description of exams and course work
There will be an oral exam of 25 minutes duration. Therein the achievement of the competencies given in section learning outcome is tested exemplarily at least to the given cognition level using comprehension questions and sample calculations.
For example an assignment in the exam might be:
- Describe chemisorption: the energy potential, the bond strength, the bond characteristics and give an example.
- How are surface reconstructions and overlayer structures described?
- Draw the energy diagram for a possible electron (de-)excitation within an atom.
- Draw the Ewald sphere for a 3D crystal and a 2D crystal. What are the conditions for diffraction?
Participation in the exercise classes is strongly recommended since the exercises prepare for the problems of the exam and rehearse the specific competencies.
The exam may be repeated at the end of the semester. There is a possibility to take the exam in the following semester.
Current exam dates
Currently TUMonline lists the following exam dates. In addition to the general information above please refer to the current information given during the course.
|Exam to Fundamentals of Surface and Nanoscale Science|
|Mon, 2021-07-12||Dummy-Termin. Wenden Sie sich zur individuellen Terminvereinbarung an die/den Prüfer(in). Anmeldung für Prüfungstermin vor Mo, 27.09.2021. Die Lehrveranstaltungen des Moduls fanden im WS 2020/1 statt. Melden Sie sich bitte nur an, wenn Sie die Prüfung verbindlich auch nach Lektüre der Informationen unter https://www.tum.de/die-tum/aktuelles/coronavirus/pruefungen/ ablegen werden. // Dummy date. Contact examiner for individual appointment. Registration for exam date before Mon, 2021-09-27. The courses of this module where offered in WS 2020/1. See https://www.tum.de/en/about-tum/news/coronavirus/coronavirus-exams/ for further information and only register after reading!||till 2021-06-30 (cancelation of registration till 2021-07-11)|
|Tue, 2021-09-28||Dummy-Termin. Wenden Sie sich zur individuellen Terminvereinbarung an die/den Prüfer(in). Anmeldung für Prüfungstermin zwischen Di, 28.09.2021 und Sa, 23.10.2021. Die Lehrveranstaltungen des Moduls fanden im WS 2020/1 statt. Melden Sie sich bitte nur an, wenn Sie die Prüfung verbindlich auch nach Lektüre der Informationen unter https://www.tum.de/die-tum/aktuelles/coronavirus/pruefungen/ ablegen werden. // Dummy date. Contact examiner for individual appointment. Registration for exam date between Tue, 2021-09-28 and Sat, 2021-10-23. The courses of this module where offered in WS 2020/1. See https://www.tum.de/en/about-tum/news/coronavirus/coronavirus-exams/ for further information and only register after reading!||till 2021-09-27|