Polymers and Polymer Technology
Module MW2232
This module handbook serves to describe contents, learning outcome, methods and examination type as well as linking to current dates for courses and module examination in the respective sections.
Module version of WS 2015/6
There are historic module descriptions of this module. A module description is valid until replaced by a newer one.
Whether the module’s courses are offered during a specific semester is listed in the section Courses, Learning and Teaching Methods and Literature below.
| available module versions | ||
|---|---|---|
| WS 2022/3 | WS 2021/2 | WS 2015/6 |
Basic Information
MW2232 is a semester module in German language at Master’s level which is offered in winter semester.
This Module is included in the following catalogues within the study programs in physics.
- Focus Area Bio-Sensors in M.Sc. Biomedical Engineering and Medical Physics
| Total workload | Contact hours | Credits (ECTS) |
|---|---|---|
| 150 h | 45 h | 5 CP |
Content, Learning Outcome and Preconditions
Content
The lecture Polymers and Polymer Technology teaches the basics of the material class of polymers and its processing methods. The following topics, among others, are covered:
• Structural design of polymers
• Chemical, physical and rheological properties and their effects on processability
• Established and novel polymer processing methods (injection moulding, extrusion and compounding, additive manufacturing, fiber-forming techniques)
• Areas of application for polymers
• Test methods for polymer characterization
• Degradation and recycling of (bio-)polymers
• Examples of the application of polymer technologies in current research projects at the Chair of Medical Materials and Implants
• Structural design of polymers
• Chemical, physical and rheological properties and their effects on processability
• Established and novel polymer processing methods (injection moulding, extrusion and compounding, additive manufacturing, fiber-forming techniques)
• Areas of application for polymers
• Test methods for polymer characterization
• Degradation and recycling of (bio-)polymers
• Examples of the application of polymer technologies in current research projects at the Chair of Medical Materials and Implants
Learning Outcome
After successful participation in the module "Plastics and Plastics Technology", students will have the following skills:
• Basic knowledge of the different classes of plastics, their fields of application and processing possibilities
• Critical evaluation of plastics technology problems
• Own development of innovative solutions in the field of plastics technology
• Basic knowledge of the different classes of plastics, their fields of application and processing possibilities
• Critical evaluation of plastics technology problems
• Own development of innovative solutions in the field of plastics technology
Preconditions
no info
Courses, Learning and Teaching Methods and Literature
Courses and Schedule
WS 2022/3
WS 2021/2
WS 2020/1
WS 2019/20
WS 2018/9
WS 2017/8
WS 2016/7
WS 2015/6
WS 2014/5
WS 2013/4
WS 2012/3
| Type | SWS | Title | Lecturer(s) | Dates | Links |
|---|---|---|---|---|---|
| VO | 3 | Polymers and Polymertechnology | Eblenkamp, M. Rojas Gonzalez, D. |
eLearning |
|
| UE | 2 | Tutorials Polymer and Polymertechnology - Processing |
documents |
Learning and Teaching Methods
The module consists of a lecture and an exercise.
In the live lecture or a corresponding video lecture, the theoretical basics are taught in a structured and comprehensive manner. In addition to the lecturer's presentation, the teaching of the basics is also visually supported by videos. The presented slides as well as further information will be made available to the students online via the Moodle learning management system in order to enable them to follow up the content on their own.
The exercise offers students the opportunity to deepen their knowledge of plastics technology in small groups by means of practical demonstrations of the manufacturing processes on the plastics processing machines. In addition, the exercise also offers the opportunity to ask specific questions to the lecturer, so that gaps in knowledge can be closed or individual areas of interest can be deepened.
In this way, students are taught, for example, different classes of plastics, their areas of application and processing possibilities. They also learn to critically evaluate plastics technology issues and to develop innovative solutions in the field of plastics technology on their own.
In the live lecture or a corresponding video lecture, the theoretical basics are taught in a structured and comprehensive manner. In addition to the lecturer's presentation, the teaching of the basics is also visually supported by videos. The presented slides as well as further information will be made available to the students online via the Moodle learning management system in order to enable them to follow up the content on their own.
The exercise offers students the opportunity to deepen their knowledge of plastics technology in small groups by means of practical demonstrations of the manufacturing processes on the plastics processing machines. In addition, the exercise also offers the opportunity to ask specific questions to the lecturer, so that gaps in knowledge can be closed or individual areas of interest can be deepened.
In this way, students are taught, for example, different classes of plastics, their areas of application and processing possibilities. They also learn to critically evaluate plastics technology issues and to develop innovative solutions in the field of plastics technology on their own.
Media
PowerPoint slides, videos
Literature
Gibson I., Rosen, D; Stucker, B; Khorasani, M. “Additive Manufacturing Technologies“ Springer Verlag 2021 https://www.springer.com/gp/book/9783030561260
Wintermantel, E., Ha, S.-W., Medizintechnik - Life Science Engineering, 5. Auflage, Springer, Berlin, Heidelberg, Deutschland, 2009, http://www.springerlink.com/content/j78q17/
Michaeli, W., Haberstroh, E., Schmachtenberg, E., Menges, G., Werkstoffkunde Kunststoffe, 5. Auflage, Hanser, München, 2002, http://www.hanser.de/buch.asp?isbn=3-446-21257-4&area=Technik
Michaeli, W., Einführung in die Kunststoffverarbeitung, 5. Auflage, Hanser, München, 2006, http://www.hanser.de/buch.asp?isbn=3-446-40580-1&area=Technik
Wintermantel, E., Ha, S.-W., Medizintechnik - Life Science Engineering, 5. Auflage, Springer, Berlin, Heidelberg, Deutschland, 2009, http://www.springerlink.com/content/j78q17/
Michaeli, W., Haberstroh, E., Schmachtenberg, E., Menges, G., Werkstoffkunde Kunststoffe, 5. Auflage, Hanser, München, 2002, http://www.hanser.de/buch.asp?isbn=3-446-21257-4&area=Technik
Michaeli, W., Einführung in die Kunststoffverarbeitung, 5. Auflage, Hanser, München, 2006, http://www.hanser.de/buch.asp?isbn=3-446-40580-1&area=Technik
Module Exam
Description of exams and course work
In a written examination (duration: 90 min.) the understanding of the gained technical knowledge is checked. In addition, it is examined to what extent students are able to apply the acquired knowledge to solve new problems and to use it for the analysis and evaluation of plastics engineering problems. Students should, for example, demonstrate that they can critically evaluate plastics technology issues and are able to develop innovative solutions in the field of plastics technology. No aids are permitted for the exam.
Exam Repetition
There is a possibility to take the exam in the following semester.
Current exam dates
Currently TUMonline lists the following exam dates. In addition to the general information above please refer to the current information given during the course.
| Title | |||
|---|---|---|---|
| Time | Location | Info | Registration |
| Polymers and Polymer Technology | |||
| 0001 |
Import | ||